ive changed the fuse, the boiler is still kicking in, the rads are all up full and it still wont ignite, however there is a slight drip of water coming from the heating flow valve, the psi bar is currently at 2, i think its something simple, can anyone shed a bit of light please?
Without specifics, I can only offer the following possible causes:
Pump/pump flow switch:
Fan/Fan pressure switch
If it is sparking at the burner, you can by-pass the above, it'll be gas related. No gas/fauly gas valve
Carefree
July 2010
the ch isnt working, however the switch is working to turn the boiler on, its running as normal but its not igniting, its as if something might be blocked?
GAZ
July 2010
No lights?
LED display tells you what? If it's a temprature only I'm guessing you're just trying hot water? could be the DHW flow switch is faulty.
Try the c/h does it work?
This isn't easy diagnosing with limited information
Carefree
July 2010
no they are not.
gaz
July 2010
Need more information.
The leak is probably a side issue as the pressure is at 2 bar.
On either side of the LED disply, are the red or green lights illuminated?
howtomendit.com for free repair help, information and advice.
