Recent: Will I need to replace my garden tap?

Mend > Washing Machines

Mend Zanussi Jetstream Turbodry Machine Hope Help

Zanussi Jetstream Turbodry problem?

Hi everyone
I seem to have a few general problems with my machine, not sure if they are all connected but really hope someone can help me. The main problem is that the clothes don't seem to wash properly, I seem to still have powder on them at the end of the wash and they don't seem to have rinsed very well.
Also the fabric conditioner drawer does not empty properly, it seems to be clogged with water/fabric conditioner despite the fact that I have totally cleaned it out. I've checked the fluff filter and also run a 90 degree wash with soda crystals to try and clear the problem but nothing seems to have worked. I'm finding that I need to wash clothes twice to get them clean which is a real pain. Hope someone can help. thank you!

Tracy
July 2010
thanks CK. Could a complete novice attempt it? how would I know what to do?

Nick
July 2010
the conditioner not going will more than likely be the holes above in the plastic conveyor are blocked with black mould.remove the soap draw completely and look up at the top holes above the conditioner compartment and see if they are blocked and mouldy.try cleaning or a replacement part may need fitting but they are a little tricky to fit

when the machine is washing can you see water being sprayed on to the clothes (jetsysytem)?.If not this could be why the clothes don't wash/rinse.Again it may need total strip down and unblocking or a new circulation pump fitted.not an easy diy project but could be done with time and care

ck
July 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Machine Hope Help

Related Questions ...

Mend washing machine spinning filter
1

Hotpoint WT540 keeps spinning - How to fix?

Hi. I hope someone can help? During a wash cycle, the power button on my Hotpoint WT540 Washing machine start... [Read more]
Mend error code washing machine hotpoint ultima
2

Hotpoint WDD960 error and not spinning?

Hi, Hope someone can help! My Hotpoint Ultima WDD960 wasking machine keeps coming up with error code F:02....... [Read more]
Mend washing machine fault codes indesit
2

can i mend my washer ?

I have a Indesit IWME12 washing machine . It will not spin and stops with the lights flashing , I have checked... [Read more]
Mend find correct washing
3

How To Find Correct Washing Machine Carbon Brush Supplier or Manufacturer?

Hi,XIAOLEI WU here. Any people or any distir dealer,who wanna find a good Washing Machine Carbon Brush Supp... [Read more]
Mend washing machine motor repair
1

wm starts then sparks then drum wont work?

i do hope someone can help me my washing machine started ok the pump is fine the motor seems to be fine its ju... [Read more]
Mend washing machine zanussi timer
2

zanussi washing machine (ZWI2125) not finishing cycle?

Hi hope someone might be able to help. everything seems to run ok on the machine through a wash until last spi... [Read more]
Mend washing machine bosch cycle
2

How can I fix this problem?

Hope someone Can help. I have a Bosch 1400 Express Classixx washing machine that only seems to wash but doesn... [Read more]
Mend stopped working flashing
5

HELP!!!F&P Gw611 Has Stopped Working. Got 2 Flashing Lights???

Hi, I was wondering if you can tell me what is wrong with our washing machine (F&P Gw611) It fills up with wat... [Read more]
Mend washing machine door locked hotpoint
1

hotpoint wf321 washing machine?

my hotpoint WF3321 is only working on some numbers and even then it stops midcycle ,when it has pumped out wat... [Read more]
Mend washing machine repair aeg
1

AEG oko lavamatic 610 electronic?

Hope you can help.. My machine goes through all cycles fine but the drum won't turn. The drive belt is tight e... [Read more]
Mend washing machine filter problem
1

Hoover550ma?

All the clothes come out of the washer with many bits on them, i have cleaned the filter which is beneath the ... [Read more]
Mend error hotpoint problem
1

f08 error message?

i have an f08 error message on my hotpoint ultima washing machine, can i fix it myself. Seems everyone knows h... [Read more]
Mend washing machine repair hotpoint
1

how can i fix my washing machine hotpoint wf540?

Hi Hope u can help my washing was working fine ..went to put it on dis morn and the on/off button light is on... [Read more]
Mend hope help problem
10

Zanussi Washing Machine problems! ?

Hi there, I hope someone can help me with this problem! I have a zanussi washing machine ZWF1432S. When I hi... [Read more]
Mend washing machine drum spinning
1

The drum on my Zanussi washing machine is sticking slightly. ?

The drum turns but not freely, feels like it has something stuck behind it. How do you get behind the drum to ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...