hi have a countax c350h...runs for about 2min then stops with cu 34 comes up on dash
dccc
July 2021
What code is c 0030 come on today now keeps cutting out
Steve
March 2021
As said above. Requires servicing as it has done its 50 hours of work. If you are servicing yourself and wish to reset, hold down the cutter button and turn key to first position. On next start, the work hours should have been zeroed.
Ian
January 2014
The code is "S" not 5 and indicates the machine is due for a service, this should be reset after a service by the dealer and should disappear automatically after four hours running.
Hope this helps
Bycapt
August 2013
I presume it says 'S' on the bottom left of the display. This means it is ready for a service.