Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Alarm Systems

Mend Diamond 400 System Years Code

Diamond 400 Zone codes??

My Diamond 400 system is at least 16 years old and I have lost the instructions. I want the code to type in so that only the exterior of the house is alarmed. I currently have to put the dog in the upstairs bedroom and "zone off" upstairs but now too hot for him up there. Thanks

Julie & Montydog
June 2010
DiamondDiamond 400Security Systems, Home Alarm SystemsSystem Years Code
Nick,
I don't know what your on about, the Diamond 400 is one of the best panels I've come across and I fit these things. Although 16/17 years is ancient to modern day standards they can still be quite good but compared to nowadays they are not great but still good. In answer to your question Julie, the manuals are a rarity and I have yet to find one. Good luck finding one!!!

Anonymous
July 2017
Julie throw your diamond panel in the bin, Its the best place for it, horrible panel, it came from Gardiner Technology, so if you google it, they may want to help you throw it in the bin.

Nick
July 2010

Automatic Answer

We may have found other answers which could help you.

Click here for System Years Code

Related Questions ...

Mend we we reset code
1

how we can we reset without the code?

We have a c and k securitech alarm system ST800L+ which we have never used as we moved in 4 years ago and didn... [Read more]
Mend alarm security system reset
2

I have code E showing on my Scantronic 9827 pad Can't activate alarm?

Scantronic 9827. Having changed the battery I tried to activate the alarm but pad display shows E. I have att... [Read more]
Mend alarm fault fitted
2

Nexus 8 alarm system - constant bell tamper fault?

My neighbour's home was burgled and the Nexus 8 alarm, which I fitted years ago, activated. Burglars smashed t... [Read more]
Mend security system battery
2

replacing new batttery in 9450 alarm system ?

how do i replace a battery pack in an 9540'thats not worked for a few years i am a new owner of the property s... [Read more]
Mend lost 12 months
9

Gardtec cpx lost chime yet again?

Over the the last 12 months I've had an engineer out no less then 8 times because my cpx has lost the dual ton... [Read more]
Mend How to mend it?
7

panel?

Hi there now before I start I have a feeling I could be lectured about the following ha basically I have a ... [Read more]
Mend alarm system code owners
2

Do not have code to alarm in home we just occupied?

I am trying to figure out what will need to be done to get my alarm up and running. We purchased a home in the... [Read more]
Mend security system home alarm battery
5

iSOLATE c & k st800L?

I bought my house 3 years ago, no code (previous owner sadly died) Alarm has stayed silent until power cut yes... [Read more]
Mend home security alarm system battery
2

How can I fix my Gardtec 360 Home Alarm system?

My Gardtec 360 alarm system (fitted with a Eurosec 12volt battery,type ES-1220,2 amp hr.,which has been in for... [Read more]
Mend noticed going alarm
3

Engineers code for galaxy 16 plus?

Just got home and noticed when going to deactivate the alarm that it was indicating power failure and the gree... [Read more]
Mend security home battery
6

Scantonic 9800 system?

Can any body help. I have scantronic 9800 alarm sytem fitted 20 years ago. Recently it started to play up. I h... [Read more]
Mend security system home
7

Scantronic 9600 showing tamper unit tamper?

Hi Alarm been working for years (we didn't install it) now when we try and set it, after putting in the cod... [Read more]
Mend How to mend it?
2

What is causing fault with ADT FBII XL-2T system?

We have a home security system FBII XL-2T that was initially installed during home build by ADT. We haven't bo... [Read more]
Mend security system battery
1

home alarm system?

i have a ade accenta ideal that goes off with the smallest power surge and i know the internal bat has not bee... [Read more]
Mend security system alarm
2

How to stop green light flashing (& set alarm)?

I have a Veritas8 alarm panel which has been brilliant over the years. This morning I got up and the alarm had... [Read more]
Mend Security Systems, Home Alarm Systems

Yale alarm app requires password/login?
Mend security system battery

Cooper Scantronic 9448 alarm?
Mend house alarm optima

How long does house alarm go for?
Mend Security Systems, Home Alarm Systems

Missing key Logic 4?
Mend security system scantronic

Disable Alarm Scantronic 9800?
Mend alarm security system home security

Scantronic 9651 alarm?
Mend security alarm tamper

Tamper won't go off?
Mend house alarm bf fault

Thorn tc3800 house alarm?
Mend Security Systems, Home Alarm Systems

Scantronics 9450 box stuck shut?
Mend systems system reset

Factory reset?
Mend security system tamper

How to turn of tamper alarm on Logic Six house alarm?
Mend Security Systems, Home Alarm Systems

Melcom ST4500 Jaytech?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Topic

Diamond 400 Alarm: Exterior Zone Code Help