suffolk colt 30 no spark at plug?

no spark at the plug everything seems to be connected points are set to 020 as per manual can you give me a clue as what to try next please

Mr Fleming
August 2018

the only thing that seems to be in there is a black module type of thing where the HT lead goes into and at the bottom is a wire that goes to the carb for the accellerater stop switch (to earth it) , what could be wrong as to stop it sparking. i have tested the HT lead that is o/k and also put on a multimeter to the HT lead wich registers a slight voltage when turned over, if you put your finger on the HT lead there is no shock at all. that was the last result to test it. it does say on the outer case that it is electronic ignition.
thank you for your time , regards frank

bigfrankie.g
June 2010

The later Punch had electronic ignition, the early Colts had contact breakers, maybe it has been converted at some time, there were after market igniter boxes that could be fitted, the wire from the coil went to a small tablet which took the place of the points.

Husqvarna man
June 2010