Remove yellow outer shell (3 lugs, 1 each side & 1 at front - pointy end) - may need to release the lug clamps from underneath with flat screw driver they pull out slightly.
Remove the cover by the +/- control.
The detergent container is a ring doughnut style, held onto the +/- control by two plastic prongs. It should lift off easily, though may be sealed to the control mixer. If replacing the container, then just pull it off.
- Mine was cracked at the feed to mixer so fell off at this stage.
chedog
May 2010
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix general d.i.y.