If this does not work remove the two muffler screws and check the condition of the piston through the exhaust port, any damage ( scuffing ) here and the saw will have to come apart to assess the damage.
Husqvarna man
May 2010
you must have flooded it , by trying to start it to many times . try burning the spark dry , by pull starting it with it swiched (off), you should see white smoke, try this for 7 + pulls , then turn it on , and try it as normal , but put the choke on , till it kicks" knock off the choke. when it kicks , and pull start it as normal , good luck .
mark
May 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
