Hotpoint Aquarius Condenser Drier - TCM570?

the tumble dryer timer gets stuck so doesent cut out

gary
December 2015

How do you replace a belt on a TCM 570 hotpoint condenser tumble dryer

Billy
May 2014

Ive changed the heating element and thermostats and still no hot air :-(

rob
November 2013

My TC570 condenser dryer cuts out the electric. I've cleaned the filters & dried out pump area . It's filling up with water & tripping again please can you help

Tom
March 2013

Thankyou so much. Throwing it on the floor seemed extreme but after about 8 times it worked. So much money saved!
regards Jackie

happy mummy and daddy
February 2013

how do you put the 2 brown wires and the 2 blue back on

bryan
December 2012

Be careful no coins get trapped in the condenser unit as this can cause the dryer to trip the mains. The pump unit has a polystyrene float that trips the machine should the pump fill with water. If the water in this unit is dried out, it might solve the problem.

Steve
October 2012

My drier is making a racket when switched on,I have cleaned out filters,switched it of and on at the mains,can u help its so noisey

Gill
October 2012

how to replace the heater element

justin butcher
August 2012

Hi,
My condenser Tumble dryer keeps on tripping my electric's in the house. I have put a new fuse in and tried it another plug but again it tripped my electric's.
Please help me.
Thanks

Shona
August 2012

Opened back of hotpoint tcm570p. Sorry I did, As the element( I think) came apart, very very flimsy.
Any Ideas or just throw it out. Initial problem was belt broken. Now this looks a lot more serious

Hotpoint Destroyer
May 2011

HI. We have Hotpoint Condenser Dryer that also tripped electric when plugged in and start button pressed. We were advised by Hotpint to pay service fee of £105.00 and engineer will call. Instead we found this fantastic site and followed some pointers left by others in similar situation. We first removed back plate with heating element and used hairdryer to dry any damp patches and slightly damp clothto wipe away any excess dust on metal plate. We also give condenser unit from front of appliance a good clean out. Also water had got into pump unit at back so made sure that was dry also. Took abit of time and being careful as to put everything bak in original position and IT WORKED !!!!!!! Yippee !!! Thanks alot HOWTOMENDIT.com and all followers. Saved us alot of cash & so near to Xmas !!!!

Darren & Kelly Taylor
October 2010