Recent: Ge tfx30pr?

Mend > Motorcycles

Mend Peugeot Vivacity 100 Power After Change

no power after belt change?

just changed drive belt on vivacity 100, now there is now power in bike pulls away very slowly and takes ages to get up to just 40mph. can anyone help?

peter
April 2010
the belt is to short or the variator is not operating properly maybe due to jammed rollers.is the belt for the right model as theres a 50cc vivacity too

adam bike doctor
April 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Power After Change

Related Questions ...

Mend motor performance fmtc
1

Table saw not running and motor sparking?

Performance (B&Q second hand) 254mm table saw FMTC 10TC Was working well, cutting bitumen encrusted bottom ... [Read more]
Mend How to mend it?
1

Canon?

Canon power shot 480 takes two AA. I use rrecharge batteries. 8 rechargeables AA four Duracell Four Super... [Read more]
Mend reset accenta g4
1

how to reset Lcd panel after power outage accenta G4 mini?

When power was restored after an outage the LCD unit was displaying a line of black squares along the top of t... [Read more]
Mend boiler heating fault
1

potterton netaheat 60 . nothing happening after programmer change?

no live at boiler power terminan. i have neutral. help please
Mend back after change
1

How can I get power steering back on after battery change?

Hi I have a Citreon Picasso on a 04 plate and I have lost my power steering since I have changed my battery, p... [Read more]
Mend 19 light power
2

Vectra 1.9 cdti?

My 08 vectra 1.9 cdti egg light on constant,total loss of power, revs to 2000, diagnostic showing 16 faults,ga... [Read more]
Mend loss power starts
2

Kango 1.5 dci 55 reg Loss of Power while driving ?

I have 55 reg kango 1.5 dci it seems to loose power when driving starts first time every time not a problem ... [Read more]
Mend temperature pressure sensor
3

Boiler Hot water intermittently losing temp, Heating seems fine?

The title explains the main issue, for some reason the hot water drops often every 20 secs or so, sometimes it... [Read more]
Mend reset factory code
8

how do i re-program my veritasR8 plus alarm?

How can i re-program my Veritas alarm after having to reset it with factory code 4321. We had to switch off p... [Read more]
Mend power dishwasher stopped working
1

Electolux has no power after lightning strike?

My Electrolux dishwasher stopped working after a lightning strike. Asked a local technician to look at it and... [Read more]
Mend power engine plate
1

peugeot 206 loss of power and engine shaking?

Hi i have a 206 02 plate. have had loads of problems since i got it a yr ago but basically we fitted a new coi... [Read more]
Mend tamper pir keypad
15

Accenta G4 mini and remote keypad only illuminating?

I recently had an issue with my Accenta G4 alarm and remote keypad. For some unknown reason the tampers were a... [Read more]
Mend boiler central heating programmer
2

Potterton Programmer not controlling stat?

I developed a fault on my Potterton system as a direct result of trying to change the in room stat (Potterton ... [Read more]
Mend 1600 error machine
1

Bosch Logixx 1600 Express Bereit Error?

My washing machine is showing Bereit in the display and the spin symbol below but no other info. This came up... [Read more]
Mend vw sharan s
1

vw sharan it an s plate?

hi i have a vw sharan 1.9 petrol but im having a problem starting it in the morning but after about the thured... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Motorcycles ...