Looking at seeing if it's worth replacing the cylinder on a little MS180, the saw is relatively new (maybe 12 to 18 months old) I have been told its cylinder has been scored. Just wondered if this job would be easy for a semi competent bloke, I'm a chippy by trade and have most basic mechanics tools in my shed. If anyone could pass on a bit of info or a link to anything I would much appreciate.
Thanks Francis.
fixed, thanks for your help, videos were a great help.
Francis.
April 2010
I striped the Stihl yesterday, cylinder and piston are knackered as were expected, it went really quite well. The tips from YouTube were a great help, took me no longer than about 45 mins.
New parts are now ordered, will update when completed.
Francis.
Francis
April 2010
I have viewed the YouTube posting and I will take the machine apart tomorrow to see what is wrong. I will keep you posted of my progress. Thanks for the link.
Francis
Francis
April 2010
Here's the link- it's actually referred to as a tear down and not strip down.
http://www.youtube.com/watch?v=0m22-0Vo6Ic
pleasant
April 2010
Thanks v much for your relply Pleasant, I will look into the youtube posting.
Francis
April 2010
Go to youtube and search for stihl chainsaw strip down. There is a guy on there that stripped down an MS230 or MS250 (can't remember which) and the principle is identical to the MS180. Personally I wouldn't bother as it's very very time consuming and involves stripping the machine right back to its component parts- if you've never done it before it's very daunting. The pro Stihl saws use a different engine design and you can replace a piston in one of those in about half an hour.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix chainsaws.