my moped wont start?

the crank pin wears where the webs press on to the crankshaft on this model and the two halves of the crankshaft go out of line and rub on the inside of the crankcase and jam up!

adam bike doctor
March 2010

In this order.
Check Oil
Check compression (kick start pushes down and comes back with force or is it reallt easy to push down with little resistance
Check for spark. Whip out your plug and put back in cap and then rest end of plug on metal part of bike (earthing it) and start as normal see if nice blue spark. I would put a new plug in anyway.
Your lights will only come on when bike is running.
Go from there

bb
March 2010

i thought it was that so i pushed it to the garage and it was not the case

dawn
March 2010

Are you sure you have plenty of petrol

Mike Andrews
March 2010