the shower has runing water to it but when i pull the cord for the water/power nothing happens, no lights no heat, i have checked the trip switchs they are ok, please can someone help?
Have you looked at the cord switch? I have known these to break inside. Usually the trip will go if the switch is shorted out but if it is just broken, then you will get no lights, now power to the shower and obviously the shower will not work. Switch off at the mains, remove the switch and get it tested. It will either work or not. The switch should be a double pole, meaning the circuit to both wires is cut when switched off. Often because the wires are so thick and do not fit in the space provided very well, the switch can be under pressure and this will break them also.
John Holden
November 2006
pump may be gone or belt off
eamon
January 2005
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.