Recent: Royal 325CX?

Mend > Lighting

Mend Switch Wiring Lighting

2gang switch, for two seperate lights?

Hi we have just built a porch, and have run cables for outside light and inside light. we have a 2 gang switch that we want to use for each light, one way.
At the switch we have live earth and neutral from consumer unit, not on a loop, end lights. And the same for each light. How do we wire the switch?

Andrea
March 2010
Cheers, up and running.

andrea
March 2010
Live into the Com terminal of each Switch - you may loop the two Com terminals together - Switched Live from either L1 or L2 of each switch for the respective lamps.

You will have three neutral return conductors - one from each lamp and one from the consumer unit - they will all need to be joined together in a terminal block strip placed inside the switch enclosure box. You do not connect the neutral wires to the switches.

The earth terminal in the wall box (patress) can be used to join the earth conductors - if it's metal it needs to be earthed.

Take care...

Peccavi
March 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Switch Wiring Lighting

Related Questions ...

Mend sensor lights switch
2

wiring sensor for original lighting?

i have 2 outside lights controlled by a 1 way switch inside the house.i want to connect a motion sensor outsid... [Read more]
Mend wiring lighting electrical
2

3 gang wiring , where do all the wires go?

i have had a friend look at my lighting, now i am left with 3 red 3 yellow and 3 blue wires, the switch has (o... [Read more]
Mend fan replace extractor
5

Replacing an Xpelair fan - wiring query?

I am about to replace an Xpelair DX100T extractor fan in my bathroom which was fitted by an electrician in 200... [Read more]
Mend switch live lights
1

wiring 2 gang switch with live at switch?

I'm wiring in 4 wall lights, 2 on each switch. Made a junction in the lighting circuit so the lighting circui... [Read more]
Mend wiring ceiling rose
1

Wiring ceiling rose?

I am replacing my existing central light fitting. The room also has two matching wall lights which I have alre... [Read more]
Mend electrical lighting wiring
3

D.I.Y Lighting?

i wish to replace an old 2 way switch with a new one. old switch has 3 wiring points at the top wired red /red... [Read more]
Mend changing light fitting
6

Changing a light fitting?

http://www.flickr.com/photos/34041411@N07/sets/72157612196775934/ Attached are the pictures to add detail. ... [Read more]
Mend dimmer switch bulb
1

dual dimmer switch for two tree bulb halogen lighting strips?

dual dimmer switch for two tree bulb halogen lighting strips, only one of the lighting strips is working, bulb... [Read more]
Mend problem light lights
1

lighting problem better explained?

new light fitting has 3 lights of which 1xblue & 1x brown wire come from each light 1 light unit in total i h... [Read more]
Mend How to mend it?
1

External PIR floodlight info?

1. I wish to put 5 No, External PIR floodlights on one circuit can this go onto an existing external lightin... [Read more]
Mend 2 wall lights working lights ok
2

2 wall lights not working - other lights OK ?

There is one circuit breaker for all my downstairs lights. Two wall lights have stopped working but the res... [Read more]
Mend wiring light switch
1

How do I connect wiring for multiple hall lighting?

We have a long hallway with a ceiling light at each end and a switch at each end. Both lights come on using wh... [Read more]
Mend light fault 2 not working
1

ceiling light fault - 2 way with dimmer not working?

Hi, We have a ceiling light fitting (brass, 2 bulbs) which isn't lighting. It's on a 2-way switch, one of t... [Read more]
Mend problem replaced tube
3

Lighting Problem?

I replaced a 3ft fluorescent tube (ceiling) with a new 6ft one. The wires on the old 3ft were as follows: 3 ea... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lighting ...