Gear selector CABLE. A very very common fault. Very very shit design, but then it's a Ford... If it's causing a problem it can be adjusted but it's not woth it, you're gonna need a new cable, might as well get it done. Does cost 100 quid which IMHO is a tad steep for what it is but then it is what it is, in'it. It's such a easy DIY fix I just got under the van and done it without having a clue how to actually do it. Man I'm good, and not just with a spanner, know what I mean...
Max
August 2010
Sounds like the gear selector on top of the gear box is sized this is a common problem on transits.The selector is bolted on to the gear box with 5 or 6 bolts you will have to remove the link cables as well to remove these squeeze the two clips on top of the cable ball joints and pull upwards. once removed take out the reverse light switch and inside you will see a bush thats probably sizid to shaft stopping the selector from moving up and down.
Raz
March 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.