I recently replaced the timeswitch for the boiler so I now have Sunvic select 107 XLS + Glow worm ultracom hxi (old timeswitch was a switchmaster 600). I have double and triple checked all the wiring it is all correct, and identical to the old configuration which worked fine.
For some reason the timeswitch does not seem to activate anything on the boiler, even on "ALLDAY" or "ON" settings. I am totally stumped as to why this is. I have tried every combination of settings on the DIP switches in case that made a difference but to no avail.
I have replaced the pcb relay in the 107XLS when the controller failed to call for heat and now the controller works fine. However, I am an experienced electronic engineer but find SUNVIC suppport uncooperative if the controller is out of warranty. B&Q no longer stock the controller so draw one's own conclusions!
I have exactly the same problem the sunvic 107 does not activate the immersion at all !
best thing to do is ask Sunvic which terminal is there switch live output on this is the only thing i can think is wrong
well vaillant must be shitty aswell then big jamboree as there one of the same
Contact Sunvic Controls Technichal Helpline by email you can also request a copy of the User manual by calling Sunvic Customer Services on 01698 812944
Sunvic Controls Limited
umm thanks that's very helpful......
i would say by a decent boiler not a shitty glow worm, a combi with an integral timer should be simple enough 4 you
I can answer this question...
Sunvic select 107 XLS + Glow worm ultracom hxi?
Please wait ...
howtomendit.com for free repair help, information and advice.