what is wrong with my Beko WM5140?

Aha, at last i am able to get the start button to flash again. I checked the pump as ck said. The machine had water in it from when it stopped working and after i emptied it, i was able to get a wash to start again but only for a few seconds. It then stopped again! Each time i turned it off at main power switch and on again, the water started to fill again for 3 seconds or so then stopped. I can't seem to reset it as not all the lights flash. The only one which flashes is the start/pause light, but that does that when you pause a programme anyway? HELP again please.
PS, i haven't tried the brushes as i wouldn't know where to start.

rimrex
March 2010

have you checked the brushes in the motor they might not be making contact with the armature on the motor

Richie 6969
March 2010

is the drain pump working?.take the filter out and shine a torch in to the filter housing and check the impellor rotates freely

ck
March 2010