Mend Zanussi Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Find out how to mend Zanussi washing machines

Mend washing machines ...

Mend Washing Machines

Mend > Washing Machines

How do I replace a broken door catch on a Zanussi Washing machine ?

Have a Zanussi FJS 1597 W. Washing Machine. Already have replacement parts but cannot get into door opening to undo screws holding it, does the door have to come off, if so how do I get into the screws, the catch has sheered off and can see the screws holding it in place, can anyone help, it is not an electrical part, just a plastc catch, has anyone had this problem? Help please!

Susan
March 2010

Zanussi Household Appliances, Washing Machines Replace Zanussi Washing

I am reading this that the door will not open because the door catch attached to the glass part is broke !
some machines have a emergency release down by the front filter ,if not
remove the couple of screws at the top rear of machine slide back the top and remove, look in machine and locate the rear of the door interlock now insert a small screwdriver in the square bit to force the door catch over to the side while gently pulling on the front door ,if no joy only other option is to break the door inter lock off, now with door open you can now access the door screws change the door opener catch and fit a new interlock if needed

wirecutterman
March 2010

the door frame is in 2 bits.you should be able to see the screws around the inside of the door frame.remove these screws.Now you have to prize the 2 bits apart with a screwdriver.it is best to remove the door with hinge attached from the front of the machine

ck
March 2010