Recent: Home max fs506x?

Mend > Cars

Mend Rover 214sei Help Changed

Terence Wright I need you help (Rover 214sei)?

I have changed brown temperature sensor on small aluminium manifold above stat housing. Rover is 100% better but still faulters on pulling away and after initial start everything okay.
I would like your opinion on what i have done.

According to my managment sytems manual it ays this particular sensor controls the throttle and i believe the advance and retard on timing to pull away.

Thanks

Tony Reynolds
April 2006
Hi tony again
Have you changed the rotor arm? These little rascals give some very odd symtoms. Even if it looks ok, it might pay to change it. Mine drove me mad untill I changed it.
Good Luck
Terry

Terence Wright
May 2006

Automatic Answer

We may have found other answers which could help you.

Click here for Help Rover Changed

Related Questions ...

Mend intermittent cold changed
2

misfire?

have rover 45 1.6 with intermittent misfire seems ok when cold gets worst hotter car gets changed coil pack an... [Read more]
Mend rover battery start
3

My rover45 won't start?

Hi can you help I changed my battery on my rover 45 2001 plate and it won't start the immobiliser light goes o... [Read more]
Mend car smoke coming
2

rover car 54 plate 2004?

my car has excessive smoke coming from the exhaust,and is very sluggish,the people who so call mechanics advis... [Read more]
Mend rover engine sensor
1

how to stop rover from cutting out?

how to stop rover 200 from cutting out. i have changed the throttle body and the crank sensor on a 99 rover 16... [Read more]
Mend cuts out engine gets warm
1

cuts out when engine gets warm?

rover 200 99 model 1600cc auto it cuts out when engine gets warm then it starts easy.its ok when cold for abou... [Read more]
Mend rover 25 turn over
1

how do i get my rover 25 to turn over?

just changed rad in my 1400 rover 25. on removing old rad i arc'd it against alternator. now the rad is fitted... [Read more]
Mend lights main side
1

iv got a range rover p38 ?

my p38 has lost its head lights and main beam, i still have side lights and if i put power to the head lights ... [Read more]
Mend metal scraping noise
3

rover400 414 rattling metal scraping noise when driven?

i have a rover 400 414 v reg its making a scraping rattling noise when driven i have already changed the catt ... [Read more]
Mend oil changed filter
4

Oil light?

The oil light on our rover 25 stays on all the time. Goes off when start as is should do but then comes back o... [Read more]
Mend rover 216 reg
1

Rover 216 auto problems?

Hi I just bought a P reg 216 and have noticed a slight hunting on tick over. I have changed sparks and checked... [Read more]
Mend help post currently heating
1

Rover 75 1.8 2004 overheating?

Hi can anyone help, this is my first post. I have a Rover 1.8 2004 which currently has over heating problems... [Read more]
Mend rover help system
1

RANGE ROVER P38?

DEAD BATTERTY, CHANGED BY FREIND WHO SAID THEY COULD HELP ??? SECURITY SYSTEM HAS GONE TO KEY CODE LOCKOUT, TH... [Read more]
Mend car model started times
2

rover 414si- what causes it to jerk?

My Rover 414si car 1996 model started jerking in recent times. the feul filter was changed but no good result.... [Read more]
Mend problem rover 25
1

problem with my rover 25?

hi i have a rover 25 w reg 1.4 my problem being when under pressure the car stutters as if its missing. I have... [Read more]
Mend emissions failed changed
1

freelander emissions?

my freelander 1.8 failed mot on emissions to hight changed o2 sensor still the same help.

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Cars ...