Recent: Safely remove screen protector from a Macbook Air?

Mend > Cars

Mend Rover 45 Heater Work Settings

The fan heater on my Rover 45 (2002) does not work on settings i or ii!?

I have seen previous comments about faulty heaters but not full correspondence. Do I need a resistor and if so how do I fit it? Can anyone help me please?

Graham Cheetham
February 2010
the problem is caused by a resistor breaking and is a common fault. the unit is behind the glove box. if you go on a website rezpax.com they do better replacement resistors which you can fit or they will fit them for you.

TIM
March 2013
it will be your heater resister at fault it will be located around the heater motor area

kev
February 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Heater Work Settings

Related Questions ...

Mend plate work changed
1

my rover 45 02 plate heater blower does not work in any settings?

I have changed the resistor pack and still does not work. Any further suggestions other than a new/second hand... [Read more]
Mend heater blower control panel
1

my heater blower not workng on all 4 settings on my picasso?

my heater blower not working on all 4 settings changed control panel still dose not work what could it be
Mend heater vectra repair
2

vauxhall Vectra Heater wont work?

vauxhall vectra 03 reg, 1800cc, heater has stopped blowing on settings 1,2,3, but works on 4, any help much ... [Read more]
Mend heater work settings
1

heater?

my heater on my picasso does not work on settings 1,2 and 3 but blows on 4 , can i fix it or do i need a new h... [Read more]
Mend heater plate works
1

Heater blower on Picasso (54plate)?

My heater blower on my 54 plate Picasso only works on setting 4 when engine running,the other settings 1,2&3 d... [Read more]
Mend problem setting switch
1

problem with blower?

my blower for the heater has 4 settings but it will only blow on 3&4 setting 1 & 2 will not work. Is it the sw... [Read more]
Mend heater blower work
1

My heater blower wont work on settings 1 or 2 ? its a 2.0 hdi 307 52 plate?

My heater blower fan will not work on 1 or 2 but will work on dettings 3 and 4.......any ideas please??????
Mend vectra heater blower
1

how do fix the heater blower switch on my 02 Vectra?

The heater blower will not work on settings 1 2 3 only on 4. How can I fix this ?
Mend heater focus motor
2

Ford Focus heater fan motor fuse?

The heater fan does not work on settings 123. this is caused by the timed fuse blowing. This fuse is mounted o... [Read more]
Mend rover heater repair
2

heater blower on my rover 200 1.6i 19-98?

y heater blower has 4 settings 1 - 4 but 1 and 2 d not work 3-4 okay any ideas as to what might be the cause ... [Read more]
Mend rover heater repair
1

How can I fix my heater on our rover 45?

On the heater switch settings 1 & 2 does not work but 3 & 4 are ok, I've heard this is a common fault, how can... [Read more]
Mend heater resistor fault
7

Rover 400 saloon heater fan speed switch fault?

The heater fan/blower speed control switch has 4 settings. The fan will not work on the two lower speeds but w... [Read more]
Mend windscreen relay fuse
2

1995 Renault Laguna?

Hi, Just wondering if anyone can help me. My 1995 Laguna has developed a couple of problems just as it is c... [Read more]
Mend head gasket clock
1

My MG 04 is under powered after changing head gasket?

My 04 MG 1.8litre, 29000 miles on the clock blew the head gasket. I got it repaired with the modified head gas... [Read more]
Mend fan third problem
2

My heater fan,nissan micra,k12,(reg 03)?

My heater fan will not work on the first two settings but will on the third and forth. Could it be a possible ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Cars ...