T1200 lights on dash?

To attach collector:
Ensure collector is locked in transport position and brake is on/tractor in gear.
Lock mounting frame on rear of tractor - levers either side lock latch pins into mounting frame holes .
Offer collector to mounting frame - ensure two lugs locate in holes and frame of collector locates in the two support brackets.
Move collector from transport position towards highest setting - this will force the collector tight to the mounting frame.
Pull clamps down over the two vertical threaded clamp screws - this may take a bit of force - I often need a lump hammer. You may also need to fiddle to ensure precise location of lugs and collector over support bracket.
Screw the clamp nuts (silvery colour with a bar through) onto the clamp screws.

oldmansimmo
March 2010

Left to right as you look at the dash:
Green: Brake safety - lit when brake pedal fully depresssed.
Green: Cutter safety - lit when cutter disengaged
(both need lit be on for tractor to start)
Red: Lit when ignition is on
Amber: Lit when motor running and battery is charging
Amber: Lit when headlights switched on

oldmansimmo
March 2010

same i cant get my sweeper on either, so annoying

josh
February 2010