The basic carb settings are one and a half turns out from closed on both H and L screw, there is a special tool to adjust the screws, they do not have a screw driver slot in the end, these are only basic settings, fine adjustment will be required for good idle and pick up, max rpm should be set up useing a revv counter, these machines run at 11700/12000 rpm do not try to get any more revs as this will only reduce the power.
Husqvarna man
January 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix chainsaws.