Beko Washing machine WMA 520S will wash normally but when it gets to the spin cycle it sounds like there are stones going round.......terrific noise.....would seem to have some vibration.....but stabilisers are in place ok and nothing obvious is loose, help?
Thank You CK for your answer---it turned out to be the concrete block at the base was insecure, due to the plastic washer put in by manuf failing. New metal washer and screw solved the problem....now back to silent wash and spin.
Jace
January 2010
put the palm of your hand on the stainless inner drum and rock it back and forth.can you feel it rough.if so bearing shot big job and expensive unless you have a day spare to buy bits and do it yourself
ck
January 2010
Automatic Answer
We may have found other answers which could help you.