AEG Lavamat 54810 Washing Machine Error Code 6 beeps?

i have the same problem with the model 54600

mosfet 36 pins
February 2011

It means the heater is on when its not meant to be which could be welded relay contacts or a faulty drive transistor.just as a matter of interest check the heater is ok and the wires are attached to the heater.tap the relay on the pcb with a screwdriver handle might release stuck relay contacts.pcb cost around £100 give or take a few quid but might not be the problem 100% as i would be testing wiring etc before risking parting with that kind of money on a 5yr old machine

ck
January 2010

ck

Many thanks for your quick reply. Really appreciate you going to the trouble.

Is the relay built into the PCB. If so could it be be a dry joint that could be soldered or is it a slot in similar to this one

http://www.espares.co.uk/part/dishwashers/electrolux/p/1083/15/0/0/502782/heater-relay.html

Cant seem to find specific info for this model.

don't mind having a go at fixing it myself if its likely to be £50ish although as the machine is around 5 years old would probably buy new if likely to be more for a complete pcb. Its used most days so hasn't done badly!

Regards

Jay Gee
January 2010

faulty heater relay on control pcb

ck
January 2010