Mend Hotpoint TDC60 Tumble Dryers

Mend Household Appliances, Tumble Dryers

Find out how to mend it for free.

Ask Question

Click here to mend Hotpoint TDC60 tumble dryers

Mend Tumble Dryers

Mend Tumble Dryers

Mend > Tumble Dryers

My hotpoint trips the electrics. why??

Our hotpoint ultima tdc60 recently had a new heating element fitted by a local appliance engineer. Since then it works okay for a short time and then trips the electrics. I called the engineer out again but when he came the machine worked perfectly. Since that visit we have not been able to use the machine as it constantly trips the electrics. The engineer told me that it was probably because there is a 'box' surrounding the heating element made of fibre board that can get damp with condensation which in turn trips the switch. Is this correct? We have only had the problem since he fitted the new heating element. Any help would be greatly appreciated.
thanks

Hans Wardle
December 2009

Hotpoint Hotpoint TDC60 Household Appliances, Tumble Dryers Hotpoint Trips Electrics

i have the same problem (if i disconect the wiring to the heater at muti plug dryer works but NO heat ) however just found this and going to try it now
how can i fix my hotpoint aquarius tdc32 condenser dryer?

have a read of the answer below
it most likely a heater fault, its possible that small metal object is lodged around heater causing short circuit, turn off, take lower back plate off & have a look. hopefully your find something, if you do it will have probably blown the thermistats so you will need to replace. If not you will prob need to replace heating element, its a simple job, dismount heater, refit new one then refit one cable at a time. Look for parts on e-bay prices pretty good, good luck.

simon
February 2008

paul
December 2009