No heating, but hot water. Boiler tells me there is ' NO demand for heat'?

Opps sorry. No need for the hot water stat as you have a combi.

BarryF
December 2009

Nothing wrong with programmable room stats, but remember they only work on the heating side and not hot water. You will need to install a seperate stat for the hot water control. Honeywell make a wireless room stat CM67 which is excellent and more efficient than conventioal rotary type.

BarryF
December 2009

Thank you.

murray
November 2009

nothing wrong with a programable state, no is no easy way to over ride the state, sorry you will have to wate for the new state.

erj
November 2009

My room thermostat is a dial - we programme it by turning it to the heat setting we want - mine stopped working after building work in the hall - full of dust and grit - I took it off the wall and cleaned it up and it worked - it's just a heat operated switch that opens when the set temperature is reached. You might wish to do this. Failing that, if you have a simple room stat - you might make a very temporary repair with a simple light switch - you will have no CH temperature control though other than flipping the light switch on and off - a Bang-Bang ststem of control - not very efficient.

Take care...

Your gender is of no consequence to your central heating controls.

Peccavi
November 2009