Recent: Safely remove screen protector from a Macbook Air?

Mend > Windows and Doors

Mend Replaced Problem Units

How can i sort out the mould growing on the sealent around my windows?

I had my windows replaced in febuary this year the problem is the sealent around nearly all of the units have mould on them which will not come off with anything i have used, i would like to know what has caused this and how to sort it out please.

helen
November 2009
50%bleach/50%water and an old toothbrush

emily
December 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Replaced Problem Units

Related Questions ...

Mend vacuum motor wiring
1

Where the red wire goes on the motor of my Bissell Powerforce?

I recently replaced a burned out motor on a Bissell Powerforce with a good motor from a Bissell Quicksteamer. ... [Read more]
Mend heating hot water time settings
1

when in auto boiler permenantly on ?

have changed my transmitter and receiver 3 times now through my heating engineer, the problem is the transmitt... [Read more]
Mend mira sport shower low water
1

Mira Sport Max 10.8 kW very low flow?

I have a low flow problem with a Mira Sport Max 10.8 kW A little background: Recently the shower began t... [Read more]
Mend dimmer switches wall
1

failing dimmer switches?

The lighting in my lounge consists of four double wall lights(ie.six lamps) controlled by a dimmer switch. Las... [Read more]
Mend problems replaced boiler
2

Problems with Siemens RCR10/433 Receiver?

I had a Boss therm which had to be replaced as the receiver was not sending the signal to the boiler despite t... [Read more]
Mend steering mondeo wheel
5

steering wobble?

on my 2ltr mondeo 1997 it has started to have a wobble on the steering wheel i have just replaced the discs bu... [Read more]
Mend double windows fitted
3

Should I accept some condensation in new sealed units?

I have had new bespoke hardwood double glazed windows fitted. During the winter there was a small amount of co... [Read more]
Mend compressor cooling defrost
1

How is a single compressor with thermostats in both fridge & freezer wired?

I have an old (1984) Thorn EMI Electra fridge freezer model 39884/21, in which the single compressor finally p... [Read more]
Mend How to mend it?
2

How can I fix my Sharp R-408DW (s/n 181107) 1200 Watt microwave?

It was completely dead so I replaced the ceramic fuse. I plugged it in to my bench outlet and it ran for a few... [Read more]
Mend oil pressure gauge
1

Oil pressure gauge?

I have a 1995 Pontiac Transport mini-van with 190,000 miles on it and I have an oil pressure gauge problem. I... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Windows and Doors ...