Selector dial on Bosch WFF 1201?

OK so front panel removed and plastic lugs holding rotor are broken off. will need complete panel, but how do you align the rotor with the numbered dial. Have found red marks to align on front panel, but rotor could be correct or 180 degrees out? Any ideas apart from trying out i guess.

Neil
September 2015

I believe you may have to replace the complete control panel - aprox £30.00

Frank Smith
August 2011

Hi Fred,

There are 3 screws under the powder drawer you need to remove then, the front case just comes off with some prizing around the edges with a flat blade screwdriver. Once the panel is off, you can remove the old dial by pressing inward the clips on the inner edge of the dial that hold it onto the rotation rim & it just comes off outwards.

I am very interested to know where you can purchase a replacement dial for this model, as I have the same problem and can't find anywhere on the new that sells it!

Thanks,

:o)

Simon

Simon
June 2010