tamper fault on veritas8?
Hi, I have a veritas8 alarm it has worked for several months ok. Now the alarm is going off even if the alarm is not set and no one is touching it.
When you check th log it lists a tamper fault. Any ideas where i can look for the fault? The box seems to be secure and all the sensors look ok.
Hope this makes more sense than the last question!
Thanks!
Richard
my first answer here is open the box and check fuses go outside and look for the bell box make sure it is lighting up and just to be sure do a test on it 1234 prog o5 1 IS BELL SO SOUND 2. IS THE STROBE THE FLASHER if they working thats good then just refer to the panel for fuses if all ok maybe new sensors get back to this website if you need anymore help
death
October 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
