How can I fix my Creda oven temperature display?

Thanks Toby - very helpful . I have just replaced the fluorescent tube on my oven - just one small point on my Creda Reflection (bought 2002 and still as new) the retaining screws for the facia were screwed in from the back of the oven and not visible without pulling out the oven about 6 " The tube is approx 12 " long and is a Philips TL 8w/33

John
October 2011

as toby says this is easy once u know how.

the small black buttons just pull off and push on again( use some small pliers)

jon
November 2010

I just replaced mine,remove the black trim from the silver surround (2 screws on top ,3 screws underneath)you should then see 1 silver screw at either end which holds the front fascia on.you will then have just enough clearance to remove the 8w fluorescent tube.i didn't have to fully remove the fascia from the buttons side cos i don't know how ,the buttons may just pull off but i wasn't going to force it .turn the bulb clockwise, and then with a small flat screwdriver on metal edge end of the bulb push right to release.its easy to replace the bulb . insert one end push the other end in the slot and turn counterclockwise.then refit screws and trim. I paid £4.99 for the bulb from a local hardware shop.

Toby
October 2009