Firsty if you have just overhauled you need to run in before everything beds in and settles, That why most new bikes are pre run in, Its solves carb and engine running problems, Also if you have removed the carb and its contents its most likely you done one of 3 things, contaminated the idle needle which allows a certain amount of fuel through, Or contaminated the main jet, Or the fuel float could be stuck which is not allowing enough fuel into the carb, Also ensure your valve reeds have are not damaged or cracked, After sorting these out then screw your idle right in as well as your main throttle a quarter in then let run until engine warms right up before resetting and idle or main screw`s
ian
October 2009