Recent: Home max fs506x?

Mend > Dishwashers

Mend Bosch 5312UC Dishwasher Error Draining

Bosch dishwasher runs forever, error message 2H?

We have Bosch dishwasher 5312UC, about 5 years old. In the display window, instead of saying the number of minutes left in the cycle it says 2H. And it runs on and on and on--over 2 1/2 hours yesterday before I turned it off and reset it. When I turned it back on it said 2H again. We cleaned the filters, the water is hot and it seems to be draining fine. Any ideas?

Jean
March 2006
The control board is bad & has to be replaced. Bosch's fix to this problem is to run water in sink till hot then turn on dishwasher. This will keep the relay on the board from over heating.

joe K
June 2008
The control board is bad & has to be replaced. Bosch's fix to this problem is to run water in sink till hot then turn on dishwasher. This will keep the relay on the board from over heating.

joe K
June 2008
The problem of 2H is a burnt circuit pad on your control board. Weve had our diswasher for 6 years and seen it happen on two new boards. It is a flaw in the design of the board. Contact questions@BSHG.COM to let them know. They will tell you there isnt a service bulletin, but its such a common problem with their dishwashers, it should be. Here is the response I got:

> > We are sorry to hear of your issue.
> >
> > However, a service bulletin is not available for the appliance.
> >
> > We recommend contacting an authorized servicer to properly diagnose the
> > appliance in person.
> >
> > In order to locate a servicer, please provide your zip code here or input
> it
> > at the servicer locator at www.boschappliances.com .
> >
> > Feel free to direct any additional inquiries here or phone 800-944-2904
> (M-F
> > 5am-8pm PDT) to speak with a Customer Support Representative.
> >
> > Regards,
> >
> > Barry

Bob
March 2006

Related Questions ...

Mend dishwasher draining bosch
1

Dishwasher suddenly failed?

Bosch Aquastar 6.5L Dishwasher. Machine 'dead'! No lights on control panel which has been playing up for a fe... [Read more]
Mend checked power water
1

dishwasher Kenwood kdw12st3a?

Dishwasher showed error 4 . I checked all outlets and nothing. Power on but not able to programmer and water n... [Read more]
Mend dishwasher blocked pump
1

Kenwood KDW60x10 dishwasher not draining?

Our Kenwood dishwasher finished its last cycle with several inches of water still in the bottom. No error code... [Read more]
Mend dishwasher error code draining
1

eurolec Essentials DW004 - Error Code?

When i put the dishwasher on it starts runs for just under a minute then it stops. Starts this annoying beepin... [Read more]
Mend dishwasher draining whirlpool
1

F1 error on 920 dishwasher ?

sounds like its still draining how can I fix thanks
Mend dishwasher pump error
1

another to do with favorit 7080 progress but error?

Thanks for help so far cleaned out pump as advised tried dishwasher again all started fine pushed wash program... [Read more]
Mend dishwasher error code draining
2

F4 Error?

I am sure you are all bored with the same issues but i have tried all sorts and am getting nowhere. THe dis... [Read more]
Mend dishwasher overfilling sensor
1

How can i fix BaumaticBDW13 that overfills & E4 error 5 mins after starting?

A day ago i noticed an inch of water in the bottom of my dishwasher after it had (successfully) finished a pro... [Read more]
Mend model problem cycle
14

Fisher Paykel soft touch dishwasher model 918TD?

I have developed a problem with my dishwasher. At the end of a cycle the unit used to beep for approx' 8secs a... [Read more]
Mend dishwasher draining flooding
8

Necht dishwasher wqp12-9319 error code E4?

My Necht dishwasher has an error code of E4 showing and will not seem to re-set. When switched on the machine... [Read more]
Mend dishwasher draining error code
2

Bosch dishwasher never finishes cycle?

I've a Bosch SGV5613GB dishwasher that seems to be constantly draining the water. I've pressed a few buttons a... [Read more]
Mend dishwasher fault code
1

How do I fix an E20 Error on Hotpoint Dishwasher 7885?

My Hotpoint Dishwasher has developed an intermittent fault coming up with an E20 error code at randon (sometim... [Read more]
Mend dishwasher fault code drainage
1

I have an AEG Favorit 64800 with a fault code?

The above model of dishwasher has recently come up with a fault code AL3. The unit tends not to drain and then... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Dishwashers ...