Vauxhall Omega gearbox fault?

We have a Zafira 2.2 2005. It changes gear fine going up the box but sticks in 4th and doesn't want to come down, we can bring it down manually or if we stop the engine and restart it rests itself.

It drives beautifully but this probalem so annoying

Elaine
August 2016

hi my omega 2.5 v6 auto hasa wee problem drives fine sometimes feela siff i have to reva lot to get it to change gear and wen it does sometimes misses gear and revs go right up and if a floor it.it clears but if i dont floor it it thumps into gear as if its not going in at correct speed the check gear box light comes on help

thomas
February 2012

I have got a vauxhall Omega 2.5 Elite automatic gears, and the gearstick is starting to stick in park after the ignition is started the engine, what could be the fault?

JIm in Beeston Nottingham
November 2010

if the gearbox is working ok, and just the fault indicator, try cleaning the selector (under the gaiter) as they get dusty i use standard switch cleaner and a soft cloth

Nicky
July 2010

I have a problem with an Opel Omega 1993 2.0 l,
The car drives no prblem,just ones in a while the S light on the automatic gear appears, and the car goes in protection and it doesnt go any more, (it goes very slow for a good while),
I ve changed the gear oil and filter, but it didnt change much. Would you be able to help me?
Thank you very much and have a good day,

ANGELO....Sardinia

Angelo sardinia
December 2009

low speed bearing grumble 20/35 mph.similar to wheel bearing,type noise,,positive not wheel bearings or rear diff,,suspect g/box (AUTO)rear bearing .in front of doughnut drive coupling,,

TERRY
November 2009

metal noise between gear box and engine automatic transmision

tomek
October 2009

nearly allways the gear selector quaudrant on gearbox done hundreds over last 14years easy to sort out remove part from box (on left hand side) strip out and clean out (gets corroded) should cure it done 3 this month so far.

dave mander dk cars sales
August 2008

The gearbox is electronically controlled,which means when a fault occurs the computer knows about it.
It could be an electrical fault,ie a solenoid a speed sensor the selector switch,or if the gearbox is slipping the computer will pick it up and put the fault light on.
It needs to be scanned with a vauxhall tech2 diagnostic machine or a similar scanner.
Richard
rbtransmissions@aol.com

richard
March 2006