Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Alarm Systems

Mend DSC 9800 System Help Noise

9800 alarm system?

Help ...moved into a new house and the alarm panel is continually making a noise ..we have no codes from the previous ownwers ...how do we turn this off ...~HELP~

thanks

Adam
September 2009
what type of noise is it? If you wanted to completely disconnect it, remove the fuse from the spur switch. It may fall dead or you may have to remove the battery from inside the panel(a grey/black box). The siren should sound at this point if the system is working correctly. You could either let it ring or disconnect the battery from inside it.

Josh
September 2009

Automatic Answer

We may have found other answers which could help you.

Click here for System Help Noise

Related Questions ...

Mend alarm system home alarm scantronic
1

home alarm system?

pet set alarm off today scantronic 9948 no beep on alarm buttons and red tamper loop system button on in r... [Read more]
Mend system 10 seconds
2

Veritas 8 and continuous 10seconds beeping noise?

Hi The alarm system is a Veratis and it keeps beeping every 10 seconds after it is unset. Previously.... ... [Read more]
Mend alarm wonder system
1

how can i stop my burgular alarm from chiming?

Hi wonder if anyone can help, we have a Accenta G3 Mini burgular alarm system and for the last 4 week we have ... [Read more]
Mend alarm system power cut security
2

Need help fixing my Optima XM6 alarm system?

Recently had a power cut in my area therefore was without electricity for 1.5 days. During the second day of t... [Read more]
Mend system battery tamper
2

How can i fix my scantronic 9448 home alarm system?

The electrics tripped out in my house and the alarm system went beserk - firstly the internal alarm noise, the... [Read more]
Mend alarm tamper veritas
1

veritas alarm went off is now in tamper & worried it will go off again HELP?

PLEASE HELP. i was trying to stop the buzzing noise coming from the alarm box when the alarm activated no code... [Read more]
Mend veritas alarm exactly
1

how do i fix my veritas alarm?

I HAD A VERITAS ALARM PUT IN JUST OVER A YEAR AGO. ON EXACTLY A YEAR SINCE IT WAS FITTED, WHEN UNSET THE SENS... [Read more]
Mend house intruder alarm
1

How can I fix my house intruder alarm?

8 years ago a Compact SL8 intruder alarm (very basic key pad) was fitted. Internal battery Texecom 12V 2.1 amp... [Read more]
Mend security system fault
2

Veritas 8 reset fault, help please!?

Hi. We've had a Veritas 8 fitted since 2002 and used it without problem for the first 3 years. Circumstances c... [Read more]
Mend alarm system tamper
1

Home alarm system?

Can some one please help? Accenta G3 panel. Alarm kept on going off for no reason. Pressed the user code many ... [Read more]
Mend security system reset
2

How do I fix my alarm very similar to a Gardtec 500 Series?

I have moved into a new flat which has a similar alarm system to a Gardtec 500 Series, which I have not had re... [Read more]
Mend g3 alarm system
1

Accentra G3?

We have just moved into a new house and have the above alarm system. When switched on the Tamper light stays ... [Read more]
Mend accenta alarm cannot set system
2

Accenta alarm, cannot set system?

Hi, I cut through the cable that was wired to magnetic sensors on exterior doors. This had been disconnected ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems