My servis 900 washer dryer wont dry. Whats wrong?

Not 100% sure about this model but it sounds as if either the the heater trip switch has gone off or heating element has broken. if its the trip there should be a re-set button on the back of the unit push it and its fixed!
More likely the Element has broken. If so, i hate to say it but it will need replaced.
If you want to test it, open the unit up and inside you should find a large outer drum that has a heating element around it. This will have two wires attatched to it from a nearby relay with spade connectors. remove these and test the resistance accross the element with a multimeter. if the resistance is either zero or infinite then its is broken for sure and this may cost almost as much as the whole thing did to buy! hope this helps.

eab
February 2006