Recent: Safely remove screen protector from a Macbook Air?

Mend > DVD Players

Mend Panasonic DMR-E85H Years Worked Fine

Panasonic DMR-E85H does not turn on?

I've had my Panasonic DMR-E85H for at least 7 years and it has been fabulous. It worked fine Friday. I went away over the weekend and returned Monday to a black screen and it would not turn on. I tried several outlets- nothing. I'm hoping it's just the power supply. Someone said that theirs did this then turned on a few hours later. Any Suggestions? Any reputable repair places near Pittsburgh, PA? Thanks - I would love to fix it or at least be able to get the hard drive and its contents.

Liz
September 2009
I can help
949.305.3733

Jim Hall
October 2009
I just repaired a DMR-E85H that had a display meesage of "Please Wait". The fix is in the power supply by replacing a couple of components known as capacitors.

While your is somewhat different I believe it gets down to the power supply. If your unit doesn't respond in any way that is the first place a tech is going to look. These units are known for power supply failure.

Jim Hall
October 2009
Mine is also doing the same....it kept showing "please wait" for a long time and would come back on automatically after a long time. I had recorded a long sessions of tv shows. It has been a great recorder. I did find this web site but haven't tried it yet...
http://vassfamily.net/projects/DMRE85H/dmre85h.html

Elle
October 2009
Hey Mine is doing just the same. Did you find a solution yet?

Max
September 2009

Related Questions ...

Mend machine bosch classixx
1

Machine not working?

My Bosch Classixx 1400 Express worked fine yesterday. Today it has tripped the electrics twice. I've drained... [Read more]
Mend hello fine printing
1

NT-1110 reset?

Hello there. We have a Geller NT-1110 which has worked fine for years. Suddenly, it's not printing off the s... [Read more]
Mend 10 night hours
2

dead delonghi dem 10?

I have my DEM 10 about 4 years and it is only used from October to March and only at night in our conservatory... [Read more]
Mend How to mend it?
7

panel?

Hi there now before I start I have a feeling I could be lectured about the following ha basically I have a ... [Read more]
Mend sudden worked second
2

tumble dryer sudden stop!?

Hi, used our tumble dryer and it worked as usual, went to put a second load in and it is completely dead! Susp... [Read more]
Mend stannah stairlift switch
1

stannah 300?

my stairlift stops every couple of inches on the way up an not on the way down. to get it to go up i have to s... [Read more]
Mend noticed morning hot
3

grundfos MK 2 15/50 x 18 playing me for a fool?

hi, i noticed this morning that my hot water wasnt hot. i checked my timmer and noticed the fuse to the mains ... [Read more]
Mend boiler heating engineer
2

What is wrong with my boiler - hot water only occasionally, heating fine?

I have a Glow worm Betacom 30c which I'm not impressed with due to the unreliability of the hot water. The ... [Read more]
Mend zanussi worked fine
1

Very noisy fast spin on Zanussi 1200 washer/dryer?

I have a 6k 1200 spin Zanussi washer/dryer. 4 years old. Worked fine for 2 years then started making horren... [Read more]
Mend worked years started
2

My Honda Izy wont start?

Its worked fine for 10 years then it started "hunting" and slowing down then eventually stopped. I have replac... [Read more]
Mend tumble power start
1

Indesit IDC75UK Tumble Dryer trips the mains power off!?

When it's 'Start' button is pressed our Indesit IDC75UK Tumble Dryer causes the Residual Current Detector (RCD... [Read more]
Mend boiler pcb potterton
1

Potterton Prima F50?

Hi guys - I have followed the common problems with these boilers (ie PCB issues) but sadly this isn't working ... [Read more]
Mend ariston microgenus 24 boiler
2

Ariston microgenus HE 24 combi-boiler PCB 2A fuses keeps blowing out?

The boiler is about 2 years old and it has started blowing fuses. All was well until last week. The boiler did... [Read more]
Mend years machine fine
2

AEG Oko Favorite Sensorlogic 18 years old?

Old but no trouble machine worked fine then next wash a few hours later would not switch on. No power in small... [Read more]
Mend creda work appreciate
1

Creda wall heater system - 1 doesn't work at all?

Hi, I would really appreciate some advice on this. I have a Creda electric heating system (EPH 1000) in my ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend DVD Players ...