Sometimes, the carb mount screws located behind the air cleaner cover get loose allowing air to leak in. Be very careful when tightening them because they will strip out the plastic the carb mounts to. Replace the fuel line also. They tend to get holes in them if you use the saw much. This worked for one of my 55's but can't figure out the second saw yet. I did strip one of the screws for the carb. DAMNIT!!!!!!!!
Sad Guy
October 2011
I took off the air filter and sprayed some carb cleaner inside. Been running great since.
Tom
November 2009
Did you ever get your saw fixed? I am having the same problem, sounds like a fuel line problem.
Tom
November 2009
Does sound like lean mixture, before touching carb check easy stuff first, fuel filter in the tank blocked, fuel hose check for cracks or splits, check pipes to purge button, check purge button itself for cracks. The mixture screws on the carb have caps on them,you may need to pull these back to adjust the mixture ( anti clockwise to run richer ) you will need to check the rpm with a taco, max free running 12500/13000. This machine has an air head cylinder and is prone to ring gumming due to the fresh air being taken in through the air ports and cooling the piston, so check for good compression, good luck.
Husqvarna man
September 2009
might be the carb settings , but unlikely if they haven't been messed with . am pretty certain that new fuel pipe(s) will cure the problem .
tony
September 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix chainsaws.