Recent: Fix food processor motor?

Mend Challenge Lawn Mowers

Mend Garden Tools, Lawn Mowers
Find out how to mend it for free.

Ask Question
Mend Garden Tools, Lawn Mowers
Find out how to mend Challenge lawn mowers

Mend > Lawn Mowers

Mend Challenge Way Nut Holding

which way do i turn the nut holding my mower blade on?

i have a Challenge petrol mower with a broken blade. the nut securing it is on so tight i can't budge it; but i'm not sure whether it's clockwise or anti-clockwise to undo it!

anrmlarge
September 2009
if it tightens against the direction of the rotation shouldn't you turn it the same direction of the blade to loosen it?

bill
September 2009
Anti-clockwise - it's a standard bolt, just TIGHT. I use an electric impact wrench. If you only have hand tools, knock on a 14MM socket (bolt is actually 9/16"), and use a long lever. Wedge the blade to prevent it turning, and don't forget to remove the plug wire.

phil_saunders(a)bigfoot.com

Phil Saunders
September 2009
The direction the blades rotate will dictate the thread.

The securing nut will be organised to tighten with the rotation - so to undo the nut you turn it against the direction of blade rotation.

Peccavi
September 2009

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Way Nut Holding

Mend Garden Tools, Lawn Mowers
Find out how to mend Challenge lawn mowers

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Garden Tools, Lawn Mowers
Find out how to mend Challenge lawn mowers