New World vision 50wlg gas cooker ignition problem?

double check it's not been switched off at wall,just happened to me.

kevin
February 2012

Hi,
I've had problems with the ignition on my New world as well, and I found out that it gets affected by the odd spillage (water from pressure cooker etc). So I dried it off using a hair dryier, and it worked !
To access the spark generator, you need to pull off the 4 knobs, then remove the 2 screws holding the hob plate down, and lift the plate up. You can then remove the spark unit (it's only clipped to the plate), but leave the wire to the igniters.
My New world cooker had got a battery operated spark ignition unit (1.5 volts - N type), but if yours is mains operated, unplug it/remove fuse first before messing with it.
As the previous chap said, you might be looking at a new spark generator unit. (not cheap, last time I googled it, was around £ 40 !!).
Good luck
Pat

Pat
September 2009

some cookers have batteries for spark, however, if a mains model, you might be looking at problems with a spark generator.

x
September 2009