Veritas control unit has the unset light flashing rapidly. Prevoius owner took manual with them so we do not know what to do! Instalation company no longer around.
Tried the same fuse and it is ok, any ideas what could caurse the unset led to flash?
patersont
June 2010
Tried what you suggested and it worked many thanks well appreciated!
Mark
January 2010
yep its to do with the power now if its a small keypad then there should be a big box somewhere in your house if you open the big box you should see the mains cable going into this little box and two wires comeing out of the other side if you can see this there should be a black pull out fuse on the box at the side pull it out and there should be a fuse possibly clear or with lines on it now shine that fuse up to a light and if the wire inside the fuse has snapped then the fuse has blown if you look around the panel there could be some spair fuses if there is then pull one out of the brakets and plug it in the black bracket plug it back in and if the unset light stops your done if its just a big box with numbers on it then its the same but there isnt another big box if thers no fuses in the panel then go to your local alarm shop or if its non of them check the fuse box what controls all the lights and the alarm fuse
howtomendit.com for free repair help, information and advice.
