Washing machine goes through wash cycle but won't "final spin"?
Hi,
I have a Hotpoint WM80P washing machine that goes through the wash cycle as normal but won't do a "final spin" on any of the 3 final spin positions. I was told it was the carbon brushes, so I've replaced them only to be stuck with the same problem. Clothes are left soaked at end of programme. :(
Thanks, for responses, I don't have a "drip dry setting". It was fine & I used it as normal (I mostly use 30 - 40 degree progs). Circuit board is something I thought of after the belt. Old brushes were only 2 thirds worn down. When the motor is in use it doesn't sound particularly smooth. Does your motor sound noisy as well Barbara?
Undying
August 2009
This has just happened to mine, I was told by an engineer that the control box has had it. A new one would be £140, havn't checked this out yet.
Barbara
August 2009
Check you hav'nt got the machine set on drip dry. This happened to me until I realised my mistake!
mrsfixit
August 2009
I can answer this question...
Washing machine goes through wash cycle but won't "final spin"?
howtomendit.com for free repair help, information and advice.
