Stairlift - maintenance manual?

I have a meditek chair lift and all of a sudden it stopped its flashing f. Can u explain what this means

Wilhelm tiffe
December 2015

do I have to remove the chairlift from the track to remove the driveshaft and gear?

Ron
May 2013

how do I take out a worn driveshaft and gear?

Ron
May 2013

If it is similar to my Silver-Glide, there are two wires from each call box. The center wire between the two diodes goes to ground. The other wire goes to the red wire, to the center slip ring. The call boxes are connected together to the same red wire. Either call box will then move the chair up or down the rail.

tanuki
October 2011

I can't answer the question. I need an answer, myself. I bought a used Liberty/ Cheney, and am unable to wire it correctly.

Two call switches, diodes in them, which I did not know when I dismantled, so do not know how to wire.

1/3 HP "Instant Reverse" motor, so I assume the switches and diodes feed "Positive alternately to whichever LOAD wire is needed to run in that direction.

I am at a loss. Does anyone have a wiring diagram for a Liberty/Cheney LL-I or LL-II?

Cheers,
George

George
August 2010

you need to contact a company like anglia or us www.goactivemobility.co.uk.
not all of us charge exorbitant fees for simple servicing . have you had problems with it ? or is it working normally ?

goactivemobility
May 2010

Somebody have the electrical schematic for stairlift Access Exel model

Richard
April 2010

Most stairlifts can be repaired without the aid of a wiring diagram and if you contact your local stairlift maintenance company you shouldn't pay much more than you would pay your local plumber. You could try us www.anglia-stairlifts.co.uk and if we are not local to you I would probably know an engineer local to you.

Craig
March 2010

What make is it?
We are a stairlift company and have many wiring diagrams.

Nicky Coop
August 2009

Contact the manufacturer

Adam
July 2009