Beko De3542FW won't heat water?

disconnect power from heating element and check across the two terminals you should get around 25-30 ohms this indicates a good heating element. Now trace your thermostat to the pcb board and check for continuity i.e a made connect if no connection thermostat is goosed last but not least check the pcb board for any melted solder connections poss around the relays

Grum
December 2009

Do you know where the other two stats are located, I changed the one that just twists out on the bottom.
Any help would be great

thanks

Delboy
July 2009

3 stats i think???.heater around 25ohms on terminals is a good element

ck
July 2009