There is no water coming through my shower and it is lighting up at auto reset button but nothing is happening. It was working but stopped when I was in the shower. I have turned off at the socket, left for a while and then turned it back on but there is still no water coming through
ive just had this problem ,check inlet valve isnt blocked, if not check the resistance measurement on the solienoid valve with multimeter the two contacts at the bottom should read 3.85, if its 000 it needs replacing cost about £10.00 from triton. its just as easy to take shower off the wall to do it 20min work, check to see if you need a stabilizing valve aswell .its sits above solienoid valve, this might be leaking, you will only no if you remove the front cover then turn it on.
kazcmot
February 2006
Visit showerdoc.co.uk for spares. Looks like the water inlet valve is not letting water in (Item 4). Either that or the stabaliser valve is faulty / blocked.(item 3). I have a problem with my mothers T80i. It wont turn on the heating elements because it thinks the water pressure is too low - that is a faulty stabaliser valve, the diaphram will not rise up, so it shows a red flag in the little window and disables the micro switches which turn on the heating elements. Hope this helps.
ROb 8-)
Kintara
February 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.