my Husqvarna 350 chainsaw has spark, but won't fire. ?
The saw got really hot when I was operating it, and it died. I haven't been able to start it since then. It has spark. How do I check if it's getting fuel to the cylinder?
mine does the same thing, and the local dealer will tell me that it's fine, I will take it home and use it for 5-15 minutes, and it happens all over again. Ihave good fuel, good clean plug, and every time I take it in, they swear they don't see anything wrong, but it willstart once or twice when I leave, then all over the cycle starts
Jeff
March 2010
Mine has done the same thing I have changed the piston ring and it still wont fire. No spark or nothing.
Danny
November 2009
I fully agree , this machine has seized.
Husqvarna man
August 2009
Flywheel key may have sheared.
studmonkey
July 2009
By now you may already be aware that it sounds like the piston may have scored the cylinder, very easily done. If you have'nt as yet, it may be worth taking the saw in for a check up. They will be able to clarifiy the situation.
Mike
July 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
