Recent: Safely remove screen protector from a Macbook Air?

Mend > Motorcycles

Mend Kawasaki ZX6R Power Until 3

No power until 3 to 4,000 revs?

Hi,
I have a 1999 Kawasaki ZX6R ninja.Its the G2 model.Its starts first time everytime.The choke works as it should.It idles without any missing or eratic running.The only extra fitted is a Remus titanium end can.Otherwise its 100% standard.
When pulling away it feels as though its going to stall ( cut out ) but as soon as it gets to 3 to 4,000 revs its perfect right up to the rev limiter.( if you want to )
Can you help please,its driving me nuts.
Thanks
Wil

Wil Paul
June 2009
Thanks Steo,
Remus recon that no jet uprade is needed for this system as its made specifically for my bike.I will however get the coils checked over.
Thanks for your info.
regards
Wil

Wil
June 2009
Hi Wil, the sports exhaust could well be making the bike run lean & hence the sluggish start, did you up-jet for it? if not you increase the jet size by 10% so if there's a size 100 in it, go up to 110.
Another possibility could be your ht coils are faulty, i've seen this happen especially on CBR's were owners have replaced carbs, ecu's, reg/recs & it turned out to be the coils.

steo
June 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Power Until 3

Related Questions ...

Mend hotpoint freezer years
1

Hotpoint fridge freezer modelNo FFUQ1810/P?

Hotpoint fridge freezer model No FFUQ1810/P Serial No34744300100 Age 8 years Twice maybe 3 times in its lif... [Read more]
Mend washing machine error code fisher and paykel
8

Fisher and Paykel MW511 PRIDE - Beeping and Stops?

Hello MW511 has started to stop part cycle with an ascending beeping and lights flashing. Rince and Fast... [Read more]
Mend working great lost
2

blowing fuses?

I have a Hotpoint Aquarius DF61 and has been working great until it lost all power when the dial got round to ... [Read more]
Mend combi boiler PCB britony
1

britony se 80 pcb replacement?

3yrs ago had code 60 fault on my se80.got a new board which i set up as the original board and fitted it.combi... [Read more]
Mend renault traffic dci
1

how can i fix my 2002 renault traffic dci?

hi all. I have a 2002 Renault traffic dci. I have only had this van for just over a month, i had all the tests... [Read more]
Mend security system home alarm battery
5

iSOLATE c & k st800L?

I bought my house 3 years ago, no code (previous owner sadly died) Alarm has stayed silent until power cut yes... [Read more]
Mend turn turning checked
1

help my 32av555d toshiba wont turn on?

my mother keeps turning the tv off at the plug when its not in use and she went to turn it on and no lights co... [Read more]
Mend diesel engine cuts
3

Mazda 3 1.6TS loses power?

My mazda 3 1.6 TS diesel cruises along well, but then without warning, loses power, and engine cuts out. Howev... [Read more]
Mend working sound system problem
3

Plug Sockets not working?

I am currently fixing the sound system at the bar i'm djing at. The problem we face is, at the moment there is... [Read more]
Mend combi boiler heating hot water
2

My Halstead combi boiler refuses to work any more - help please!!?

Hi, I have a 6yr old Halstead Ace High combi boiler which has never given me any problems until now. About 3 -... [Read more]
Mend baxi solo 3 pfl boiler
2

how can i fix my Baxi solo 3 pfl boiler?

The boiler will start up and all lights come on and boiler fires up. After approx 30 mins of working ok, the b... [Read more]
Mend car drives revs
2

Corsa C 1.3 Diesel Strange problem?

My car drives fine, revs freely no problems, nor warning lights etc. Except as soon as I accelerate sharply as... [Read more]
Mend engine restarts help
3

diesel engine suddenly stops. always instantly restarts?

Can anyone help? My diesel car motor stops unexpectedly. Mechanics don't know why. My diesel engine power... [Read more]
Mend boiler radiators power flush
3

Can can I fix an airlock in the central heating system?

I have recently had a new valliant eco plus gas boiler fitted, along with 13 new lockshield valves and TRV's o... [Read more]
Mend washing machine error code fill problem
3

Fisher & Paykel GW907AU won't fill?

Hi, machine will not fill correctly, stops and starts on both hot and cold fills, and warm fill. Taps are on.... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Motorcycles ...