3 hours ago: Clear E1 error code on smeg dishwasher with no water or leak?

Mend Honda Motorcycles

Mend Vehicles, Motorcycles
Find out how to mend it for free.

Ask Question
Mend Vehicles, Motorcycles
Click here to mend Honda motorcycles

Mend > Motorcycles

Mend Vehicles, Motorcycles

creaking noise coming from front wheel area of honda lead?

creaking on breaking and accelerating also going round bends

d k
June 2009
Hi DK

If it is your bearings at top of handlebars this is your head bearings. I would replace fairly quickly. Could cause an accident. You will need a manual and some knowledge of bikes.
If I remember correctly it has a shock on the front which is fairly easy to take off. Not sure if worth taking apart just buy replacement, or you could get a can of WD40 and srpay around it (DONOT SPRAY ON OR NEAR YOUR BRAKES) and then bounce up and down to see if this makes a differance? If you are lucky it may just be a bit siezed up and this will free it.
good luck

BB
June 2009
thanks for replying, it is creaking when you bounce it i suspected either shockers or bearings at the top of the handlebars.

d k
June 2009
I suspect your forks. Sit on bike engine off and bounce up and down is it creaking? see if you can pin point it.

bb
June 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Noise Coming Area

Mend Vehicles, Motorcycles
Click here to mend Honda motorcycles

Other models...

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vehicles, Motorcycles
Click here to mend Honda motorcycles