Replacing front wheel bearing vauxhall omega 2.0ltr?

I recomend you untighten the hub nut with car on floor before removing anything else, the hub nut is very tight approx. 250lbs/ft. torque. you will need a great deal of leverage. Otherwise the job is quite straight forward, about 1.1/2hr or so.

ericn
March 2011

On 2001 DTI I fitted a replacement hub complete. About an hours job and about £80 from local factor. Wheel off, remove caliper (two bolts) remove brake disk ( one star drive) and then remove the big bearing retaining nut, Strait forward enough?

fergyhr2
December 2009