1. Disconnect the battery
2 Expose the rear fuse box.
3 Pull out all the plug connectors - theyr'e colour coded so you won't put them back in the wrong socket. They have a slide lock at the outside end of the plug which has to bed pulled up to release them. One plug which holds a data ribbon has a push in at its left side which needs pushed in to release.
4. At the top middle is a cross head screw which must be taken out.
5. at the top right hand side is the release clip. Pull out the red tab using pliers - fully withdraw it Then push down on the release clip - the top should pull forward and lift the bottom up to fully remove.
6. Complete the above to install a new replacement fuse box.
RFCally - Glasgow
January 2011