Mend Samsung Televisions

Find out how to mend it for free.

Ask Question

Find out how to mend Samsung televisions

Mend televisions ...

Mend Televisions

Mend > Televisions

how can i fix bn44-00134a power supply board?

samsung 40 inch tv will not come on continuace
clicking

john
May 2009

Samsung Video, Televisions Samsung 40 Clicking

Yes you can fix it, just replace those 4 capacitors with bulging top. Very easy as its just a single layer board, no complications at all. Make an attempt, u don't loose anything... Just $ Australian Dollars ...

Benny- Melbourne
February 2011

i offer a repair service for this board and others for anyone who is not good with a soldering iron all work is guaranteed, have a look at my website for more info.
thanks
andy
andys electronic stuff
http://www.andyselectronicstuff.co.uk/index.html

andys electronic stuff
October 2010

can i fix it

john
August 2010

many thanks for the info managed to fix mine to. this seems to be a fault with this model worldwide samsung are just ignoring it though will never buy any type of equipment from them again

glen
May 2010

There are two blue parts in the high voltage section, one of them appears to be burned. Can anyone ID them for me?

Ron
February 2010

it would be better to get these caps in higher voltages. it would last longer in case the same problem happens again in 2-3 years time.

op2bts
November 2009

go to radio shack buy four 272-1032c capasotors and replace them on your board labled cpasotors cs806,cm811.cm812 and cm817 very easy fix ..mine works grat now like new did it myself including soldering kit from radio shack for 32.00

mytoolguy
August 2009

Fixed mine and drew up this doc to help others.

http://www.megaupload.com/?d=U61DEBJ2

Thanks

Dal
July 2009

Just fixed my tv aqs well with your tip and it works perfectly!! Saved me a bundle. Thanks THANKS!!!!!

Joe Andrews
June 2009

THIS IS A TOP NOTCH PEICE OF INFO JUST DONE MY MATES FOR HIM NOW WORKING PERFECT

R40PMD
June 2009

replace the four (capasitors) Al Electrolytic Cap 105C 10V 1000uF that have blown from (rswww.com part No. 526-1115) rs now sell to the public cost under £2.00
make sure the capasitors go back the same way the (- strip) goes to the bold possition

(maplins only do 16v does work but would be best to use correct voltage)

lester
June 2009

there is a kit available on ebay for £12.99, look under model number le40r74bd

john
May 2009

thanks aniff changed the 4 resistors jobs a good one
cost me £1
tv people wanted £50.00 to collect
then £75.00 to take back off
replace the power supply board £130
plus labour

john
May 2009

change the resistor which you can buy from maplin it will cost you £2 in total and solder it on and and will solve your problem

aniff
May 2009