Just bought above second hand(reported fully working but not been used since december), cleaned filters, checked inlet etc but doesn't seem to be filling with water. Please can you help?
The inlet is behind the bodywork which also cannot be removed. there is no surround that can be removed. The inlet valve cannot be pulled through the metal bodywork either. =0(
lizzie
April 2009
Thanks for answering but after removed inlet hose and unscrewed screws- can't remove inlet bit and surround doesn't come off????
lizzie
April 2009
There is a lockout on the inlet valve on some of these and with you transporting it it may have locked out.remove the cold fill hose from the back of the dishwasher.remove the screws that hold the plastic surround that holds the inlet valve and prise it out with the inlet valve attached.you will find a hose attached to the top of the inlet valve once removed.remove the hose from the inlet valve and blow down it and then reconnect it to the inlet valve.reassemble and try.hopefuly it will now fill.
ck
April 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.